Skip to main content

Preset config overview

Preset Config in Demokraft combines multiple video polishing operations into one reusable action for Studio projects created through extension recording, video uploads, or presentation uploads. You can include an Intro scene, an Outro scene, Background image, Music, Script enhancement, AI voice-over, and Captions in a preset instead of configuring each operation separately. A preset can open and close every video with your own intro and outro scenes. Their settings are the same as in the Scenes panel, described in Intro, outro and chapter scenes.
Presets are not available for projects created from a template, Prompt a Studio, Prompt a Motion, or Prompt a Motion Premium.
Configure presets, apply them to projects with Apply, and review the processed video.

Create and manage presets

Use Preset Configs to combine video polishing operations into reusable presets while keeping control over whether to apply or adjust each operation individually.
1

Open preset settings

Open Preset Configuration and go to Settings. Preset Settings is where you can add a new preset and manage existing presets. You can create up to 20 presets for different use cases like marketing, product demos, training, and other video workflows.
Preset Configuration Settings
Manage Presets
2

Configure operations and save

Add a new preset, or edit, duplicate, or delete an existing preset. Select the operations to include in the preset (with any combination):
  1. Name the preset.
  2. Enable Background image, and choose the image settings you normally use in Studio Editor.
  3. Configure Music config.
  4. Script enhancement.
  5. AI voice-over config.
  6. Captions config.
  7. Intro scene and Outro scene (see Add an intro and an outro).
Finally save the preset. Once saved, it becomes available in your video project.Each step card opens collapsed, showing only its on/off switch, so you can see at a glance which steps are on. Turn a step on with its switch, then select Settings to open its options. If something is missing when you save, the step that needs attention opens by itself.Each operation is independent. For example, a preset can generate an AI voice-over from your current script without Script enhancement, or add Captions without an AI voice-over. Captions follow the spoken audio, so for a presentation, which has no audio of its own, they appear only once it has an AI voice-over.
Configure Preset Operations
Save Preset

Add an intro and an outro

A preset can add an intro scene at the start of your video and an outro scene at the end.
1

Turn on the Intro scene or Outro scene step

In the preset editor, scroll to the Intro scene and Outro scene cards, which are listed after Captions. Turn on one or both. A preset with only an intro or only an outro is valid.
2

Choose a template and settings

Select Settings on the card and configure the scene exactly as you would in the Scenes panel. The templates, texts, colors, fonts, duration, Brand Kit, and logo are described in Intro, outro and chapter scenes.
In a preset, the intro title is not saved. The card shows Filled from the project name, and each time you apply the preset the intro title becomes that project’s name. All other texts are saved as you enter them and are used on every project.
3

Save the preset

Save the preset as usual.
Intro and outro scenes are added first, before the other steps, whatever their position in the editor. That way the AI voice-over and captions are created for the final video, including the new scenes.

Apply a preset to a project

Use the Presets panel to choose a preset, apply its configured operations, and verify the completed video.
1

Select a preset

Open the Presets panel and review the preset’s configured operations, including Intro scene, Outro scene, Background image, Music, Script enhancement, AI voice-over, and Captions. Select the preset you want to use.
Select Preset
2

Apply the preset

Select Apply. Review the confirmation warning that existing configurations may be overridden, then confirm to start processing. If the project already has an intro or outro, the warning lists it as about to be replaced. Demokraft processes each configured operation in sequence, and the progress can be monitored as the workflow runs.
  • You can close the tab; processing continues and the progress shows again when you come back.
  • While a preset is applying, you cannot start another operation on the project.
  • If a step fails, the steps already completed are kept and the remaining steps are skipped. The summary shows what was applied and what was not.
  • An intro or outro from the preset replaces the project’s current intro (at the very start) or outro (at the very end), so applying a preset twice never gives you two. A scene you added in the middle of the video is left as it is.
The confirmation also lists anything in the preset that will not be applied to this project, while the rest still runs:
  • the AI voice-over, when the preset’s voice is no longer available, cannot speak the project’s language, or your AI voice allowance is not enough. You can generate the voice-over afterwards from the Script panel;
  • an intro or outro logo that was deleted from your brand kit. The scene is added without it;
  • a scene font that is no longer available. That text uses Inter instead.
If nothing in the preset can be applied, it does not start.
Apply Preset Confirmation
3

Review the video

When processing is complete, a summary lists each step as Applied, Not applied, Failed, or Not run, with the reason for any that did not complete. Play back the video with all selected operations applied to verify the final result. Continue editing afterward to make additional individual adjustments and retain control over the finished video.An intro or outro added by a preset is an ordinary scene: select it on the timeline to change it, or delete it, as described in Intro, outro and chapter scenes.

Troubleshooting

The preset refers to something that no longer exists, for example a deleted image, a deleted uploaded music file, or a deleted intro or outro template. The message lists every problem found. Fix what it names, usually by editing the preset in Settings, and apply it again. Nothing on the project changes when this happens.A voice-over problem (voice no longer available, a voice that cannot speak the project’s language, or not enough allowance) does not stop the preset. The voice-over is shown as not applied and the other steps run, unless the voice-over was the only step.
A scene keeps the look it had when it was added. To refresh it, open the scene and apply it again, as described in Scene videos are rendered once.
An earlier step in the same run failed, so this step never started. Look higher in the summary for the step that failed. Steps that finished before it are kept.
A preset is still applying. Wait for it to finish. If a run was interrupted, for example by a server restart, the project becomes available again on its own after a while. If it stays busy for an unusually long time, contact support.